Swing Gate System

Swing Door Type Automatic Fence Door / Rotate for iron gatewith DC motor drive and the capacity per arm is 3.25 metersEvery purchase includes:Battery Backup / AkiMountingRelease Key

Swing Barrier Functions and testing:1. Indicator LED light: Its always on once the system electrified. LED indicator for auto-closingflashes every 1second. It turns off when enter into the learning code state or removing code state; it flashes twice after successfully learning code or removing code.2. Transmitter : using our company own customed rolling code. Singe-leaf button controls opening and closing of MOTOR2, double-leaf button simultaneously controlsopening and closing of MOTOR1 & MOTOR2. The control panel can memorize 20 transmitters at most.3. Code-learning: press and hold learning button for 1second then release, LED turns off and press any button of transmitter, then LED flashes twice, now the codes has been learnt to the panel. If there is no any signals received within 5seconds, the LED will light and then exit code-learning state .4. Code-removing: press and hold learning button (once you press learning button,LED is off), 5seconds later LED lights up, now the codes has been removed.

Swing Gate Brand E8 Automatic Type: E3300Each Set Purchase includes:Actuator Arm gateControl PanelGate BracketRelease KeyWall mounting bracketTransformerPVC Control Box typeDry Backup Battery2 Channel Remote Control one setWith the following specifications:Supply Voltage: AC 110/220 V /, 60Hz 50HzBackup Battery: 12v 7AhOperating Voltage: DC 16V for Normal Speed, 8V DC for more speedMaximum Gate Length: 3.25 Meters per SideSafety Clutch: ECSRemote Control: 2 Channel 330Mhz UHF

Swing Gate Arm Opener Merk E8 Series Type E3000E8 DC ARM Gate Motor set c/w: 2 units DC ARM Motor 1 unit Control Box 1 unit Transformer 1 unit D1 Control Panel Board 1 unit 7AH Backup Battery 2 units Release Key 2 units Wall Mounting Bracket 2 units Gate Mounting Bracket 1 set of receiver and 3 nos. of remote control

Underground Swing Gate DC Motor Series : E4000Specification•    Supply Voltage            : AC110/220V, 60Hz/50Hz•    Operating Voltage        : DC 24V for Normal Speed  DC 12V for Cushioning Speed•    Driving Method        : Gear Driven with Clutch plate Type•    Max. Output Power        : 25W Per Actuator•    Gear Box            : Normal Gear Reducer•    Operating Cycle        : 6-8 Seconds Per 90° (Approx)•    Max. Weight of Gate        : 200 kg per leaf•    Max. Length of Gate        : 3.25 Meter Per leaf•    Safety Clutch            : Mechanical clutch release •    Electronic Controller        : Micro-Processor Based•    Remote Controller        : 2 Channels, 330MHz